Learn how to clean and descale your kettle with 9 quick and miraculous tricks
What are the best ways to remove kettle scale? What materials do you have at home that can easily remove sediment, chalk and sediment from the kettle? If you are looking for answers to these questions, then in this article we will provide you with 9 simple and practical ways to clean and remove kettle deposits.
The white sedimentary layers are formed from the boiling of heavy water and the deposition of its salts at the bottom of containers such as tea makers, kettles, and samovars. The accumulation of these sediments, in addition to reducing the quality of boiling water and darkening the color of tea and coffee, also causes an unpleasant taste of the drink. These deposits are alkaline and can be removed with an acidic solution. If you are also facing this issue, stay tuned. Below, we will describe all the tricks for removing kettle deposits.
Clean and remove kettle dirt with instant methods
Calcium carbonate is a natural compound often found in city water. When you boil water containing calcium carbonate in a tea kettle, the substance dissolved in the water precipitates and sticks to the bottom and sides of the kettle in the form of a substance called limestone.
Limestone is not dangerous to the body, but it may affect the quality of tea and tea. Also, if sediment increases too much, it can cause kidney stones. But the good news is that calcium carbonate dissolves easily in acidic substances and you can use easy methods, with cheap and readily available materials, to remove kettle scale at home.
We will refer to these methods in the following.
1. Descale the boiler with citric acid powder
Citric acid powders are available in the market as washing powder. Citric acid is stronger than vinegar, and if you're using it to remove kettle deposits, you should use gloves to protect your skin.
To use citric acid, you must fill a kettle with water and bring it to a boil, then add a small amount of this substance (about two tablespoons) to the water and mix it, depending on the amount of sediment in the kettle, let this solution boil for 10 minutes and then let it boil for 15 minutes. Then turn off the kettle and after it has cooled down, remove the sediment and wash the kettle with plain water.
2. Descale the kettle with apple cider vinegar
All types of vinegar have acidic properties, but apple cider vinegar has the most cleaning properties among vinegars. Also, using vinegar to remove kettle deposits is a good environmental protection method, which also causes less damage to the skin of the hands and the respiratory system. You can use vinegar in several ways:
First method:
Mix equal amounts of vinegar and boiling water and pour them into the kettle.
After boiling, let it boil for 20 minutes.
Then turn it off and let it cool down; The precipitated pieces are separated from the walls and bottom of the boiler on their own.
Then wash it, and if you find sediment, repeat these steps again.
At the end, fill the kettle once with plain water, boil it and empty it until the kettle smells of vinegar.
The second method:
To remove scale from the kettle in this way, you need to pour equal amounts of vinegar and water into the kettle and boil it again. But in this method, once the kettle boils, turn it off and let it cool.
Leave it overnight until morning and then remove the sediment from it.
After removing the sediment, first wipe the inside of the kettle with a clean soft cloth, and then boil and empty the water into the kettle once and then use it.
Third method:
In this method, you can use equal proportions of vinegar and lemon juice or vinegar and lemon to polish the kettle even more. If you add some salt to it, it will have a greater sedimentation and polishing effect. But the amount of salt should not be large, for example, 1 teaspoon is enough for an 8-liter kettle. The rest of the steps should be done the same as the previous two methods.
3. Descale the kettle with a slice of lemon
In this method of removing kettle deposits, some fresh lemons should be cut after washing them thoroughly. Then fill the kettle with water. Pour some lemon juice into the kettle. Place the lemon in the kettle so that it is above the water. Boil these ingredients together for 10 to 15 minutes. Then turn it off and remove the material from it. Fill the kettle again with plain water and boil for 10-15 minutes, then wash it and wipe it dry with a clean towel. This method is associated with weak and thin sediments.
4. Descaling a stainless steel kettle with baking soda
The amazing use of baking soda for the home is so much fun; Baking soda is used as a cleaner and limescale remover in many cases, such as removing water deposits from glass and removing tea and coffee stains from cups. This widely used chemical is also effective in removing kettle scale. You can remove kettle scale using baking soda by performing the following steps:
Add 4 to 5 tablespoons of baking soda to some water. The volume of water should be such that the kettle is filled with water.
Fill the kettle with a mixture of water and baking soda.
Put the kettle on the stove and bring the water and baking soda solution to a boil.
After boiling for 30 minutes, turn off the heat and wash the kettle.
If the desired result is not achieved by performing the above steps, repeat this process several times.
5. Descale the boiler with a salt bath
For this, you have to fill the kettle with water and pour 1 or 2 cups of salt in it and leave it in the kettle for 10-15 minutes. You can heat this mixture a little. Fine salt particles separate large, hardened particles from the walls and bottom of the kettle. Then, with a spoon, completely separate the loosened materials and wash the kettle with soapy water.
6. Remove the deposits of the electric kettle with softener and cloth
In this method of removing kettle deposits, you have to fill the kettle with water and add a tablespoon of fabric softener to it. Leave these ingredients in the kettle for an hour or so. Then empty the ingredients and wash the soap inside the kettle with water that is cooler than the water inside the kettle. Then wipe the inside of the kettle with a soft cloth and wash it again with plain water.
7. Remove boiler deposits by shock
In order to remove fresh and accumulated boiler deposits in the form of a thin film on the boiler walls, the shock method can be used. For this purpose, do the following steps:
Put the kettle without water on the stove until it gets hot.
Then immediately pour ice water into it so that the sediment in the kettle is separated from its body by the shock.
Note: When heating the kettle without water, make sure that the kettle does not burn due to overheating.
8. Descaling the boiler with potatoes
To remove scale from the kettle with potatoes, perform the following steps:
Depending on the size of the kettle, grate 2 to 3 potatoes and pour them into the kettle along with some water.
Put the kettle on the stove and let the mixture of water and potatoes boil for 30 minutes.
Whisk a piece of white alum and add it to the ingredients in the kettle after 30 minutes.
Wait for the ingredients to boil in the kettle for another 30 minutes to separate the sediment from the body of the kettle.
Then empty the kettle, wash it and boil it with new water until it is completely clean.
9. Descale the kettle with soda
The citric acid in the soda will help remove kettle scale. For this purpose, do the following steps:
Pour soda into the kettle and put it on the fire until it boils.
Then easily remove the sediment pieces from the kettle and wash the kettle.
