Steps to paint the aluminum window the right way
The coating of aluminum windows is slightly different from other metal and wood windows; It is first necessary to clean the window and prepare it for coating with lubricant in several steps.
House painting is one of the tasks of home renovation and renovation of old items that we need from time to time. In particular, some building materials made of metal should be taken care of to prevent wear and tear. Of course, that's not all, over time, the appearance of any device may lose its effect, which can be solved by drawing. By painting the aluminum window, you can restore its lost effect.
Steps for painting aluminum windows
How to paint aluminum window frames? If you decide to paint your aluminum windows, before starting work it is best to keep in mind some points, so that you can do your work in the best possible way.
1. Preparation
In the first step, before starting work, you should choose a clean handkerchief and then prepare a bowl and mix some soap and water in it. After that, the desired window should be thoroughly cleaned with a washcloth and soap and water. Be careful that there are no stains or dirt on the window, because the remaining dirt will change the final color after painting the aluminum window.
Next, you should use lubricant to prepare the window for painting. It is best to spray the lubricant on the window and use a thin brush or toothbrush to distribute the lubricant throughout its parts. After cleaning the entire surface, it is preferable to use a clean cloth again to wipe the surface of the window so that the possible stains that may have remained on it while cleaning the window are well removed.
2. The beginning of work
To start work, apply a layer of putty under the work on the window. Using an undercoat can eliminate cracks or unevenness on a window.
3. Start painting
With this work done, it's time to start painting the windows and you can start working.
Step 1: Open the cap of the paint that you can buy for this purpose and move it around with a stick like the screw of a spoon or a good screwdriver. Be careful not to spill the paint out of the can while stirring.
Step Two: Before starting work, use a small brush or toothbrush to remove excess paint that has spilled around the can.
Step 3: To start painting, apply a thin layer of paint using a paintbrush from bottom to top. Apply the paint evenly and brush gently on the window.
Step 4: Complete the painting several times until the entire window is painted, leaving no part of the window unpainted.
Tip: Using several thin coats to paint an aluminum window is much better than using a thick coat. after applying each layer, make sure that the previous one is dry; By doing this, the quality of your board will improve and it will look more presentable.
