The cause of the washing machine vibrating and its solution
The reason for the washing machine to vibrate may vary depending on the type of washing machine. Usually, the most important reason for a washer to vibrate is that it is not level, so you should check the connections and washers of the washer to make sure they are not damaged.
Does the washing machine start to vibrate and vibrate violently while it's running? Small vibrations can be normal, but if the vibrations are strong and produce a lot of noise, then you should look for a solution, because these vibrations will not only cause you discomfort, but also will not be good for the performance of the washing machine. To solve the problem, you need to find out why the washing machine is shaking. Below we list possible causes and solutions for each problem.
The cause of the washing machine shaking and how to prevent it
The reason a washer vibrates can vary based on its model, but front-loading washers vibrate more than top-loading ones; Because these machines have more powerful motors and their rotational speed is much higher. Many reasons can cause your washing machine to vibrate, but you can find the cause and solution in the list below.
1- Lack of level
Washing machines usually have adjustable bases. It is very important to make sure the feet are adjusted and the washing machine is level before operating the washing machine. First, check if the problem is caused by the washer not being compatible with the leveler or apps.
Most washers have threaded bases that you can adjust in height with a wrench. To do this, raise the car slightly, open or close the bolt as far as you like, then tighten the nut to the body of the car until it locks. Note that it is better to shorten the other legs than to raise one, because the lower the height, the less the washer vibrates.
Newer cars have automatic rear stands, to use this feature, place the car on the front stands and then place it twice to set the stands.
2- Problems related to the upper set of the washing machine
Some washing machines have the ability to put a dryer on top of them. For this, the upper group is for them, and sometimes it is this group that causes the washing machine to vibrate. If you do not install this set correctly or lose its washers, it will not be able to maintain the necessary balance and will begin to vibrate.
Check the car kit and its connections to make sure it is working properly.
3- Unbalanced load
A large, wet garment or fabric, such as a machine-washed blanket, can stick to one side while the washer is running and cause the washer to misfire, creating a jiggle. Adding one or more towels or something to disrupt this asymmetric distribution often solves this problem.
Hard items such as sneakers should never be put in the washing machine alone and should always be accompanied by a towel or some softer clothes so as not to upset the balance and operation of the washing machine.
4- Improper floors
If the washing machine is placed directly on the floor without any supports, adding a floor mat underneath can help prevent vibration.
Place a plank or two under the washer to create a more stable surface.
5- The internal connections of the washing machine
Sometimes the springs that connect the car's boiler to its body may have been lost, and this causes the car to become unbalanced when cornering.
Check these connections and shock absorbers for correctness.
6- Asymmetric lower surface
The legs of the washing machine may be flat, but you still find that the washing machine is shaking. Another reason for the washing machine to vibrate can be an uneven floor surface.
In this case, you can place a plank under the base of the washer on the sloping parts of the ground to level the washer.
If none of these simple methods prevent your washer from shaking, there are anti-vibration operating systems on the market that can help solve your problem. For example, there are anti-vibration pads or special mounts that hold the machine in place.
