The cause of water leakage from the washing machine and its solution
Washing machine leaking water is a common problem. Among the causes of water leakage from the washing machine, we mention broken door rubber, holes in the hoses, a problem with the inlet valve and excessive use of washing powder.
The washing machine is one of the essential household appliances, so breaking it down is a big challenge. One of the main problems with these appliances is water leakage, if your washing machine also has this problem, then you don't have to worry. Sometimes the cause of a washing machine leaking water is simple and you can fix it yourself. So stay with us, in this article we will go through what causes this issue and how to fix each of them.
What is the cause of water leakage from the washing machine and how to fix it
If you see water on the floor, the washer isn't necessarily leaking. Therefore, check the washer for leaks first. To check the washing machine, it is best to try the wash cycle with it. While the washer is running, carefully check under and around it. Also check the door and the detergent compartment. If you did not notice the water leakage by checking the items mentioned, wait, if you see water on the floor again, check the solutions that we will say next.
1. Hoses for washing machines
The washing machine has two hoses, one is the drain hose and the other is the water inlet hose, which may be faulty.
To check if water is leaking from the drain hose, it is best to first go to the washing machine while it is working. If you notice that water leakage only occurs while the washer is spinning, the problem is with the drain hose. At this time, you should check the following:
Hose connections should be checked to ensure they are intact.
Check the drain hose. Check its connections and the health of the hose.
Check the drain hose from the inside and make sure there is no foreign object stuck in it.
If the drain hose is damaged, try to replace it, and of course if the damage is near the connections, you can use the hose again and fix it in place by cutting the damaged point.
When buying a washing machine, the water drain valve to which the hose is connected is closed, and if you have just purchased and used the washing machine, check this part as well, it is likely that your problem will be solved by opening this valve.
If you do not find any problem after checking the drain hose, it is best to go to the water inlet hose of the washing machine and check the following things:
There are two faucets for hot and cold water on the back of the washing machine. There are hoses connected to these two valves that must be checked and replaced in the event of a malfunction.
Check the water inlet hose clamps for leaks. If there is a problem, fix it.
Be careful, if for any reason you open the water inlet hose, you must use new washers to close it again. If you have used the old gaskets again, this could be one of the reasons for the water leakage.
Note: If you want the hoses used for washing to be more durable, use the polymer type.
2. Water inlet valve
The inlet valve is responsible for controlling the entry of hot and cold water into the device. This valve is located behind the washing machine in the form of a valve and is connected to the inside of the washing machine through a hose from the back of the washing machine. You need to check the valve and hose, for this first turn off the power of the device. Pay attention that both the valve and the hose are intact and not cracked or cracked. There may be deposits and minerals left in the valve or it may be damaged and need to be replaced.
3. Excessive use of detergents
Excessive use of detergents can also be a cause of water leakage from the washing machine. In these cases, by reducing the use of these materials, the problem of waterproofing will be solved.
4. Detergent powder container
Another part that may cause water to leak out of your machine is the detergent powder container. Water leakage from this area is very common and is caused by the cleaners you use. The use of these materials over time causes wear on this part and plastic and metal parts are punctured or even cracked. For this reason, be careful when using bleach and use it in the necessary amount.
Another reason for water leakage from this room is because the pressure of the water entering it damages the room, so be careful to keep the water pressure at the required level.
5. Water leaked from the front door of the washing machine
Water leakage from the front door of a washing machine is common. Continuous use of the appliance causes substances such as hair, thread, etc. to stick to the door of the washing machine and over time, leads to the door not closing. With this, the water will seep out. To solve this problem, you need to clean the tire, but the tire itself may tear or puncture over time, which will lead to water leaks. In addition, the washer door lock may also be faulty, in which case it needs to be replaced.
6. Drainage pump
The drain pump has a gasket located on the pulley, and if it is faulty, the device will leak. The drain pump is tasked with draining the water in the form of drops, but if the amount of water near the pump is high, then this is a problem and it must be repaired or replaced.
7. Washer bowl or fryer
Another reason for water leakage from a washing machine is a hole in the washing machine boiler. Be careful that when installing the washer, the surface underneath is smooth so that the washer is in good alignment. If not, then over time the washer bowl will have a hole. At this time, you have to report the repair work, which usually involves a lot of cost to repair this part.
8. Bearing and felt bowl
Not leveling the washer, in addition to the pot problem, can also cause problems with the felt bowl and bearing. Of course, the failure of the bowl and the hair can also be caused by the incorrect use of the machine, such as the large size of the clothes. You should do repair work for this part as well.
